Levon Luther Posted March 18, 2013 Report Share Posted March 18, 2013 Hi All - I am using the V10 Map on my Subaru and was looking to setup flat foot shifting, noticed that it wasn't there. Opened up my buddies map with the Vipec version of the board and it was right there in the motor sport section. What gives?Do I need to add it in? Thanks Levon Quote Link to comment Share on other sites More sharing options...
Scott Posted March 19, 2013 Report Share Posted March 19, 2013 Hi Levon, It is there, it is called 'Gear Cut Control' and is under the motorsport section. in older versions of PCLink it was called flat shifting. The other issue could be if you are running really old firmware. Is your ECU actually a V10 plug-in ECU? Scott Quote Link to comment Share on other sites More sharing options...
Levon Luther Posted March 21, 2013 Author Report Share Posted March 21, 2013 I need to hook my computer up to check. Should have done that first My car is a 2004 USDM STi, but used a base map of the Subaru V10, because that was the closest thing, and is what my box said. Quote Link to comment Share on other sites More sharing options...
Levon Luther Posted March 21, 2013 Author Report Share Posted March 21, 2013 Updated from 4.9.3 to 4.9.7. I feel retarded yet again... it was there for both versions Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.