neil brown Posted July 20, 2014 Report Share Posted July 20, 2014 is there a lead from the storm ecu to plug and play wiring loom for a ver 4 subaru impreza Quote Link to comment Share on other sites More sharing options...
Simon Posted July 21, 2014 Report Share Posted July 21, 2014 No we don't have an adapter for the Storm for this application as we have a dedicated plugin to suit. You could look to boomslang.us as they would be able to make you a custom one. Quote Link to comment Share on other sites More sharing options...
neil brown Posted July 21, 2014 Author Report Share Posted July 21, 2014 What size is the map sensor  which is built in  3 bar or 4 bar Quote Link to comment Share on other sites More sharing options...
neil brown Posted July 21, 2014 Author Report Share Posted July 21, 2014 Also  i have fitted some 25 watt 4R7 resistors for the g1 ecu to run low impedance 3 ohm injectors  is the storm ecu ok to do this as well  looked on another thread here and you recommended 50 watt items Quote Link to comment Share on other sites More sharing options...
Simon Posted July 22, 2014 Report Share Posted July 22, 2014 For the map sensor it will depend on the age of the Storm. Silver cased ones are 2.5bar and the ones that are in a blue case are 4Bar Yep 25W 4.7 ohm per injector will be spot on. Quote Link to comment Share on other sites More sharing options...
neil brown Posted July 22, 2014 Author Report Share Posted July 22, 2014 just aquired a g4 link storm ecu in silver case  looking for correct pclink software and pin out wiring diagram please  thanks neil Quote Link to comment Share on other sites More sharing options...
Simon Posted July 23, 2014 Report Share Posted July 23, 2014 http://www.linkecu.com/support/downloads/pclink-download/pclink-g4-v4-10-2.1784 This will be the software / firmware to use. Help file contains all the wiring pinout information. Quote Link to comment Share on other sites More sharing options...
neil brown Posted July 24, 2014 Author Report Share Posted July 24, 2014 got my ecu today and updated the firmware and loaded the ver 3-4 map supplied  have notived the plug is missing 5 pins  cand i get some pins on there own and are they available   ps how do i set up the antilag using a digital input 2 as not using a maf sensor Quote Link to comment Share on other sites More sharing options...
Simon Posted July 28, 2014 Report Share Posted July 28, 2014 Yep pins are available. In any quantity. You will need a switch wired to a Di, Antilag will need to be conditional on this input and you will need an air bypass to allow extra air through the engine. Â Quote Link to comment Share on other sites More sharing options...
neil brown Posted July 28, 2014 Author Report Share Posted July 28, 2014 can i add in a 12v solenoid to jack open the throttle body to allow extra air in Quote Link to comment Share on other sites More sharing options...
Simon Posted July 29, 2014 Report Share Posted July 29, 2014 Yep that is an option that is often used. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.