Paul1436215430 Posted January 6, 2015 Report Share Posted January 6, 2015 Hi everyone, I just had a quick question regarding the ignition condenser fitted to the factory SR20DET loom. Basically what i was wanting to know is, is it still required when running a G4+ (plugin). the main reason i ask is im just trying to tidy up some of the unused or unnecessary wires+plugs and wasnt sure whether this is still required.  Thanks Paul Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 6, 2015 Report Share Posted January 6, 2015 Hi Paul, it will only really need to be used if you have interference or electrical noise through the radio or sometimes noise induced into the triggers. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted January 7, 2015 Report Share Posted January 7, 2015 Correct me if I am wrong, but I don't recall the sr20det engines to have an ignition condenser. Paul are your referring to the igniter/igniter chip? If so then yes you will have to retain that. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 7, 2015 Report Share Posted January 7, 2015 Hi Paul, What Brad is saying is correct, sorry I misunderstood what you where saying (Joys of having a fried brain from having brain strokes , ) I thought you were referring to the small square black suppressors found on some imports. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Paul1436215430 Posted January 9, 2015 Author Report Share Posted January 9, 2015 Thanks for the reply guys, David, you correct. I'm talking about a small capacitor that is wired into the #1 coil. on the sr20det loom it is remote mounted near the oil filler cap on the engine loom. I forgot to mention in the first post that this is on a s15, so it doesn't have an ignitor. Ive done some research into what it "does" however it really wasn't clear other than saying it was required for some "older" ecus. so i thought id ask everyones thoughts Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 10, 2015 Report Share Posted January 10, 2015 Hi Paul, the capacitor or suppressor is only really required if you get electrical noise through the ECU causing issues, this will normally only be found when the laptop is connected , or may show up as a misfire in an extreme case or twitching tacho or similar, or noise through your radio. The ViPEC ECU's and not sure but the LINK ECU's may have been the same, when first released came with a capacitor /suppressor in the kit, but they have stopped adding these in the kits many years ago now. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.