sasha Posted May 3, 2013 Report Share Posted May 3, 2013 Hi there, i have a small problem here.i Have got G4 storm wanna to connect to 4A ge(off mr2) . Dose any one have a diagram to connect standard ignition to  G4? thanks Quote Link to comment Share on other sites More sharing options...
Scott Posted May 6, 2013 Report Share Posted May 6, 2013 Hi Sasha, Here is the pinout information for the factory ECU: http://home.clear.net.nz/pages/phil.bradshaw/16v%20Pins.htm You will need to match that up with the Storm pinout. Let us know if you run into any problems. Scott Quote Link to comment Share on other sites More sharing options...
sasha Posted May 22, 2013 Author Report Share Posted May 22, 2013 Previously sasha wrote: Hi there, i have a small problem here.i Have got G4 storm wanna to connect to 4A ge(off mr2) . Dose any one have a diagram to connect standard ignition to  G4? thanks Quote Link to comment Share on other sites More sharing options...
sasha Posted May 22, 2013 Author Report Share Posted May 22, 2013 ops! hi Scott i have done everything above, have you got wiring diagram for igniter? i have connected already just want to make sure that is correct! Quote Link to comment Share on other sites More sharing options...
Simon Posted May 23, 2013 Report Share Posted May 23, 2013 The 4AGE igniter should be like the 1UZ. http://www.linkecu.com/support/documentation/technical-drawings/I08 Quote Link to comment Share on other sites More sharing options...
sasha Posted June 17, 2013 Author Report Share Posted June 17, 2013 we hooked everything up and the injectors are not getting a signal. We set up in sample storm mode.  we have spark on the spark plugs but no injectors injecting petrol. we set up the dizzy with 24 tooth and four tooth. can you give us any advice. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 18, 2013 Report Share Posted June 18, 2013 The four tooth will need to be changed to be a single tooth. Currently this will cause the ECU reset the firing order 4 times in a cycle, it should only be once. Do you get injection when doing injection test on each injector drive? Quote Link to comment Share on other sites More sharing options...
sasha Posted August 7, 2013 Author Report Share Posted August 7, 2013 hi i dont know how to run the test for the injectors. could you tell me how to run it? btw here is a photo in the attached file of the reading what i'm geting .it might help to figer out the problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.