Evan Stone Posted June 26, 2012 Report Share Posted June 26, 2012 Hey there i have a v4 link running on a 1uzfe, standard 2x coil distributed ignition system. I want do do a coil on plug conversion with the coils from the 1uz vvti. Can i run a wasted spark setup with the two ignition drives, ie run 4x coils on each drive? Thanks for any help Evan Quote Link to comment Share on other sites More sharing options...
Scott Posted June 26, 2012 Report Share Posted June 26, 2012 Hi Evan, No, this is not possible. You are going to need a minimum of 4 ignition drives. Could be a good time to upgrade to one of our G4 ECUs? Regards, Scott Quote Link to comment Share on other sites More sharing options...
Evan Stone Posted June 27, 2012 Author Report Share Posted June 27, 2012 Hi Scott Thanks for the reply, i suspected that would be the case. A G4 Atom would be suitable? Thanks Evan Quote Link to comment Share on other sites More sharing options...
Scott Posted June 27, 2012 Report Share Posted June 27, 2012 Hi Evan, Yes the atom would do the job fine and would be a big step up from what you currently have. If your ignition setup is going to be coil on plug you will also require 8 ignitor channels (2 x 4 channel or 4 x 2 channel). Regards, Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.