cubeqtio Posted July 21, 2015 Report Share Posted July 21, 2015 (edited) Hi,I am a new user for the Link G4+ PnP Evo 6 ecu. I downloaded and updated to the new 5.4.3 firmware.I tried to do the ignition timing calibration but for some reason the lock ignition timing feature and the adjustments won't work. Example - I have the runtime values open and the engine is roughly idling 1200-1300 rpm (haven't adjusted the idle yet) and timing is 20-22. When I open the calibration window the timing drops to 0. Ok thats fine but when I change it to 10 - nothing happens. Also when trying to adjust the delay and timing correction - nothing happens.Using a Bosch timinglight with my friend.Any help? Edited July 23, 2015 by cubeqtio topic name Quote Link to comment Share on other sites More sharing options...
Simon Posted July 21, 2015 Report Share Posted July 21, 2015 Make sure you hit return/enter after typing in any numbers. Once you hit enter the change will take effect. Quote Link to comment Share on other sites More sharing options...
cubeqtio Posted July 21, 2015 Author Report Share Posted July 21, 2015 I think I did. Will try it again. Quote Link to comment Share on other sites More sharing options...
Simon Posted July 21, 2015 Report Share Posted July 21, 2015 Of course make sure you are online at the time too. Quote Link to comment Share on other sites More sharing options...
cubeqtio Posted July 22, 2015 Author Report Share Posted July 22, 2015 Yep. I am. As I can see the other runtime values changing. Will try today (wednesday). Quote Link to comment Share on other sites More sharing options...
cubeqtio Posted July 22, 2015 Author Report Share Posted July 22, 2015 (edited) Got it working. Had to reupload the rom to the ecu. Now works just fine!So there could be a issue if you upgrade from the older version to this new one.Thanks again for quick replys! Edited July 23, 2015 by cubeqtio Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.