llabmik2 Posted December 17, 2015 Report Share Posted December 17, 2015 Just wondering if it's a hardware limitation,software limitation or neither and it can be changed in further updates that is the limiting factor in the calibration tables in the analog input directory for readable RPM being limited at 65530. I am running a EFR 8374 on my MINI and want to use the speed sensor and log it with the Vipec. Problem is the translator box is 3K rpm at 0.5v and 190K rpm at 4.5v So its above the limit of what can be read. I would log it on a DI using turbo speed but its out of the hz range of the vipec.. ThanksShanne Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted December 17, 2015 Report Share Posted December 17, 2015 Use Cal 1?I've just set up CAL 1 to start at 0.5V, 3000RPM and go to 4.5V in 12500RPM steps.Table then goes to 190500RPM Quote Link to comment Share on other sites More sharing options...
mapper Posted December 17, 2015 Report Share Posted December 17, 2015 Or just calibrate it ro read in 1000's0,5v = 34,5V = 119Should be enough exact. Quote Link to comment Share on other sites More sharing options...
llabmik2 Posted December 18, 2015 Author Report Share Posted December 18, 2015 Well I missed that. Thanks guys. Just have to switch some things around. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.