James Berry Posted February 20, 2016 Report Share Posted February 20, 2016 Hi all I had my car at the mappers today and he was unsure how to setup the vvti solenoid on my car. I have a Lexus IS200 turbo which has the 1gfe engine. I run a link G4+ storm and there are no base settings for the 1gfe. Could you please advise how to set this up?? Many thanks in advance!! James berry uk Quote Link to comment Share on other sites More sharing options...
Simon Posted February 21, 2016 Report Share Posted February 21, 2016 If you follow one of the other Toyota configurations it will get you close. Be sure to do the cam angle test to make sure you have the offsets correct. Quote Link to comment Share on other sites More sharing options...
James Berry Posted February 22, 2016 Author Report Share Posted February 22, 2016 Can you explain in little more detail please?How comes there is no base map for the 1gfe engine? Cam type? Cam control module?cam angle test?surely the L/H inlet ect depends on the engine? Sorry for all the questions Would it help if I upload my map This is my map Scoff Map temp sensor fix.pclr Quote Link to comment Share on other sites More sharing options...
Simon Posted February 22, 2016 Report Share Posted February 22, 2016 Hi JamesCam type for trigger 2 vvt will be Inlet/LHCame type for Di will be Inlet RHCam control mode 2GR-FE When going through the set up if you are unsure of a function right click on the function and it will bring up the help file info for it. This should explain almost all functions well.If you search 2GR in the help file this will also have a lot of applicable information. The reason there is no specific 1GR map is due to us not having done one inhouse. We only have maps for cars or engines that we have had as inhouse test units. Quote Link to comment Share on other sites More sharing options...
James Berry Posted February 22, 2016 Author Report Share Posted February 22, 2016 (edited) could you explain the Inlet/ L/H and Di Inlet R/H please, Also the 2GRFE is a V6 engine and my engine is a 1GFE which is a straight 6 engine NOT a 1GRFEmy vvti solenoid is front left on exhaust side and my cam sensor is back right on my inlet side Edited February 22, 2016 by James Berry Quote Link to comment Share on other sites More sharing options...
Simon Posted February 22, 2016 Report Share Posted February 22, 2016 Woops sorry was thinking it was the V6 you had! On an inline engine you will of course only have one intake cam to worry about.So in this case it will be assigned as Inlet/LH don't worry about the LH designation as this is only applicable when applied to boxer or V engines.We will need to know the tooth pattern on the cam is it 3 teeth at 90deg to each with a gap or is it 3 evenly spaced teeth?This will effect the cam vvt mode selected. Quote Link to comment Share on other sites More sharing options...
James Berry Posted February 22, 2016 Author Report Share Posted February 22, 2016 3 teeth evenly spaced mate Quote Link to comment Share on other sites More sharing options...
Simon Posted February 23, 2016 Report Share Posted February 23, 2016 Sweet.1JZ set up will be the go to copy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.