Mohsin Posted June 22, 2016 Report Share Posted June 22, 2016 hey everyonei have got denso 3 bar map sensor , omni 7 bar map sensor what would i select for omni 7 bar map sensor i can see only 7 bar in menu is this i need to choose ??and what about for denso 3 bar map sensor i can see only 2.5 bar and gm 3 bar in menu the rest are different please confirm me or should i go for omni 7 bar ??link g4+ plugin 3sgte st 205 Quote Link to comment Share on other sites More sharing options...
Rich RDE Posted June 22, 2016 Report Share Posted June 22, 2016 You should be able to calibrate the denso 3 bar with the 3 bar map sensor config inside the pull down tab. If you choose to go with the 7 bar then you will need to choose the 7 bar setting. Cheers Quote Link to comment Share on other sites More sharing options...
Scott Posted June 23, 2016 Report Share Posted June 23, 2016 Make sure you are using the latest PCLink (5.6.1), in this we have added some extra sensor calibrationsScott. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.