sama Posted July 30, 2016 Report Share Posted July 30, 2016 Hello guys, I wanted to know how accurate the internal barometric sensor on the Storm is and if it comes enabled from factory or you need to enable it, I ask because the racetrack where the car is raced changes climate, weather and barometric pressure fluctuates around the day so on previous ECU (AFC) I had to do a bit of minor changes each test, qualy and race day, the storm is installed on a Starlet 4EFTE engine with a 3.5 bar AEM Map sensor. thanks everybody Quote Link to comment Share on other sites More sharing options...
Scott Posted August 1, 2016 Report Share Posted August 1, 2016 Hi Sama,The BAP is enabled from the factory, if you open the Runtime Values Window (F12 key) and look at the 'General' tab you will be able to see the current BAP reading in the left hand column. Here is some info on the accuracy at various temperatures:Scott sama 1 Quote Link to comment Share on other sites More sharing options...
Simon Posted August 1, 2016 Report Share Posted August 1, 2016 Also make sure you are tuning on MGP for the main fuel table.If this is set to MAP it will not correct for Baro. Quote Link to comment Share on other sites More sharing options...
sama Posted August 2, 2016 Author Report Share Posted August 2, 2016 thank you both! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.