lysaer Posted October 10, 2016 Report Share Posted October 10, 2016 (edited) Hi thereWhich sensors would be recommend plug and play to easily integrate with the link g4+ ecu for my rb26dett engine pleaseWant to monitor all the main important information, oil pressure, water temp, egt, o2 etc etc I currently have the HKS camp 2 additional sensors, could they just be wired in ?https://www.nengun.com/hks/camp-2 Will I also need the XS expansion loom ?Would it also be worth fitting the Link igniter ? Thank you in advance Edited October 10, 2016 by lysaer Quote Link to comment Share on other sites More sharing options...
Simon Posted October 10, 2016 Report Share Posted October 10, 2016 Stock igniter is fine.ECU wise we can take a 0-5volt input and temp sensor wise just about any style can be used as long as they are a varying resistance.For the camp 2 units you might be able to share the signal direct from the sensor. I would suggest an XS loom to allow easy wiring of addition (non stock) sensors. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.