coupe-r Posted January 17, 2017 Author Report Share Posted January 17, 2017 Just to update this thread the car is running and idling with no trigger errors. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted January 17, 2017 Report Share Posted January 17, 2017 SO has the issue with the G4+ Xtreme red been solved?I ask cause I have one and have not experienced said issues with the trigger scope. Granted, my unit has been on a shelf for a little less than a year and is not running the newest firmware. Quote Link to comment Share on other sites More sharing options...
Simon Posted January 17, 2017 Report Share Posted January 17, 2017 No not solved as only confirmed on bench on the 17-1-17 suspect it will be a firmware issue and older firmware may not be effected. coupe-r 1 Quote Link to comment Share on other sites More sharing options...
Simon Posted January 19, 2017 Report Share Posted January 19, 2017 We have found the issue on our in house unit.If you can check the internal 3.3V supply in the runtimes this will let us know if you have the same issue.Voltage should not be higher than 3.3 volts. Quote Link to comment Share on other sites More sharing options...
coupe-r Posted January 19, 2017 Author Report Share Posted January 19, 2017 We will try this tonight. So internal ecu issue? (or software?) Quote Link to comment Share on other sites More sharing options...
Simon Posted January 20, 2017 Report Share Posted January 20, 2017 If this is the case then hardware issue. Quote Link to comment Share on other sites More sharing options...
coupe-r Posted January 31, 2017 Author Report Share Posted January 31, 2017 So i got the owner to log the voltages and the 3.3 internal is not above 3.3 volts.I'll see if he can post the log here. Quote Link to comment Share on other sites More sharing options...
chris164935 Posted February 6, 2017 Report Share Posted February 6, 2017 (edited) Just wanted to bump this up as I am having a similar problem. When cranking the motor, Trigger Scope function is not picking anything up. My ECU is the Vi-PEC i88 running the latest firmware and using PCLink G4+ software. Internal 3.3v is reading 3.29v. (Would cranking the motor cause this to go higher? Didn't think to check it while cranking.) Is the Trigger Scope only meant to work when the motor is running? Edited February 6, 2017 by chris164935 Quote Link to comment Share on other sites More sharing options...
coupe-r Posted February 6, 2017 Author Report Share Posted February 6, 2017 We have the car running perfectly now. However still no trigger scope.Scope SHOULD work while cranking the engine and connected and logging to the ecu. Quote Link to comment Share on other sites More sharing options...
Simon Posted February 7, 2017 Report Share Posted February 7, 2017 Yep should do. It would be worth trying with logging of just incase that is the issue. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.