Anthony Parle Posted January 16, 2017 Report Share Posted January 16, 2017 On my G4+ I have configured it to have one input go high when cranking to start the engine.It seems some people don't do that,Does Link recommend that it be done or not worth the effort? Quote Link to comment Share on other sites More sharing options...
Scott Posted January 17, 2017 Report Share Posted January 17, 2017 Hi Tony,So when cranking the engine the positive signal from the ignition switch goes to a digital input of the ECU? No problem to do this. This is how I would expect it to be configured:Scott Quote Link to comment Share on other sites More sharing options...
Anthony Parle Posted January 17, 2017 Author Report Share Posted January 17, 2017 Hi Scott,It was more a question, as I have been told that its a waste of time.Do Link say it should be configure that way or it doesn't matter? Quote Link to comment Share on other sites More sharing options...
Scott Posted January 17, 2017 Report Share Posted January 17, 2017 The image above would be the normal way to connect a start signal input to a Link ECU. It can be useful for pre-crank prime or if you want the ECU to control the starter motor.Scott. Quote Link to comment Share on other sites More sharing options...
Anthony Parle Posted January 17, 2017 Author Report Share Posted January 17, 2017 Thanks for clearing that up Scott, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.