azmak Posted April 4, 2017 Report Share Posted April 4, 2017 I inserted a 350 Z plug-in.SLIP and VDC light up.This is a non-functional state.VDC ON / OFF switch does not respond.Please tell me the method of recovery. Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted April 4, 2017 Report Share Posted April 4, 2017 Quote Link to comment Share on other sites More sharing options...
azmak Posted April 4, 2017 Author Report Share Posted April 4, 2017 Please tell me the way of terminal and connection. Quote Link to comment Share on other sites More sharing options...
scrambler980 Posted April 5, 2017 Report Share Posted April 5, 2017 im in the same boat. from what I see we will need to get the expansion connector for a digital output to wire the switch in Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted April 5, 2017 Report Share Posted April 5, 2017 (edited) If this is the correct wiring Diagram try wiring it like this. Edited April 5, 2017 by Ducie54 Quote Link to comment Share on other sites More sharing options...
azmak Posted April 28, 2017 Author Report Share Posted April 28, 2017 I am very grateful to you.I'll give it a try. Quote Link to comment Share on other sites More sharing options...
azmak Posted May 2, 2017 Author Report Share Posted May 2, 2017 I thought by looking at the wiring diagram, but I could not understand it.Please tell me in detail.Please also tell me about software settings.I’m at a loss of what to do. Quote Link to comment Share on other sites More sharing options...
Niven Chetty Posted May 23, 2017 Report Share Posted May 23, 2017 Hi Azmak, Adam helped me with this issue, You just have to power your ecu before the ABS ecu is being powered! You can use a relay for this Quote Link to comment Share on other sites More sharing options...
pvainola Posted January 25, 2020 Report Share Posted January 25, 2020 In 350z the traction control is controlled via ecu and stability managment is controlled with a different unit. Both units turn on or of via the ESC (electronic stability control) button. This means that there is a CAN connection between the button and ecu. In my friends Haltech this funtions straight out of the box. What can I do for my G4+ to get the same functionality? Quote Link to comment Share on other sites More sharing options...
TechDave Posted January 25, 2020 Report Share Posted January 25, 2020 The 350Z in New Zealand never had Traction Control. I'm working on updating our streams to include this and a few more features too. Quote Link to comment Share on other sites More sharing options...
BeallJK Posted January 25, 2020 Report Share Posted January 25, 2020 3 hours ago, TechDave said: The 350Z in New Zealand never had Traction Control. I'm working on updating our streams to include this and a few more features too. Dave - if it's one thing I wish the G4+ had, it'd be an OEM replica or as-close-as-it-can-be to OEM traction control / VDC model. I'm humbled to say, the OEM traction control / VDC has saved my ass more times than I'm prepared to admit. To your knowledge - Is there a thread here that has a good traction control setup I could borrow? as-always, thank you! Quote Link to comment Share on other sites More sharing options...
pvainola Posted January 26, 2020 Report Share Posted January 26, 2020 On 1/25/2020 at 9:47 PM, TechDave said: The 350Z in New Zealand never had Traction Control. I'm working on updating our streams to include this and a few more features too. That's great news, thank you! Personally I think the VDC in useless, but if I let my friends drive my car (400wkw) I prefer to have some stability control available. Our yearly MOT reguires that there are no dashlights lit and the systems work. I think that getting it 100% right will help your sales too. Quote Link to comment Share on other sites More sharing options...
pvainola Posted March 25, 2020 Report Share Posted March 25, 2020 Any updates @TechDave? Quote Link to comment Share on other sites More sharing options...
TechDave Posted March 25, 2020 Report Share Posted March 25, 2020 Nope. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.