brettr Posted June 21, 2017 Report Share Posted June 21, 2017 Afternoon,Wondering if there is someone out there who can guide me on ABS sensor wiring for signal pickup in the g4+50 year old car with commodore VT abs sensors mounted to read the flange bolts off 3 piece rims (12 bolts per rev).So assume these being 2 wire are passive sensors generating an analog AC signal.The Link will read this on a DI input?And do i wire these one side to +12v and the other to ground through say a 270ohm resistor with the g4+ picking up the signal between the resistor and sensor?Sorry a little lost and couldn't find help file info - but then again most of the stuff i'm doing is not normal.Any help appreciated.BR Quote Link to comment Share on other sites More sharing options...
Simon Posted June 21, 2017 Report Share Posted June 21, 2017 Easy as one side to ground and the other to the ECU Di. Quote Link to comment Share on other sites More sharing options...
brettr Posted June 21, 2017 Author Report Share Posted June 21, 2017 Thank you very much, appreciated.BR Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.