BCNR33Zed Posted July 18, 2017 Report Share Posted July 18, 2017 Hi guys, how can I configure my speed source on my r33 GTR? Is AWD, so, phisically don't have a NON driven wheel. Quote Link to comment Share on other sites More sharing options...
Simon Posted July 19, 2017 Report Share Posted July 19, 2017 Just use a driven input but assign as non driven. You can actually have both driven and non driven off the one input. Quote Link to comment Share on other sites More sharing options...
BCNR33Zed Posted July 19, 2017 Author Report Share Posted July 19, 2017 Okay thanks. So for the Accelleration source I can choose Non driven or Driven and is the same, right?I'm trying to configure the gear ratio tables. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 19, 2017 Report Share Posted July 19, 2017 Accel source is not really used for much. If you just have only the one VSS sensor connected to the ECU like the stock GTR has then do your setup like this: Quote Link to comment Share on other sites More sharing options...
BCNR33Zed Posted July 19, 2017 Author Report Share Posted July 19, 2017 I don't know if I have that sensor.i'm configuring speed sources and gear detection for control boost pressure on each gear, launch control, etc.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.