lysaer Posted August 4, 2017 Report Share Posted August 4, 2017 Hi all How do I enable the wheelspeed over CAN out so that it displays on my gaugeart LCD All other sensors are showing fine, oil temp, oil pressure, water temp, boost, battery etc Thanks in advance Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 4, 2017 Report Share Posted August 4, 2017 Our generic dash stream sends out all 4 wheel speeds, but your car only has one VSS connected so only one of those wheel speeds will work, the other 3 will read zero.I just had a look at Gaugeart's documentation but it doesnt state anywhere which wheel speed channel their device is actually looking for so you are going to have to experiment a bit in PCLink.Go to your DI3 settings, change its function to try LF,LR,RF,RR, hopefully one of those will work. lysaer 1 Quote Link to comment Share on other sites More sharing options...
lysaer Posted August 6, 2017 Author Report Share Posted August 6, 2017 Our generic dash stream sends out all 4 wheel speeds, but your car only has one VSS connected so only one of those wheel speeds will work, the other 3 will read zero.I just had a look at Gaugeart's documentation but it doesnt state anywhere which wheel speed channel their device is actually looking for so you are going to have to experiment a bit in PCLink.Go to your DI3 settings, change its function to try LF,LR,RF,RR, hopefully one of those will work. Cheers @Adamw will go and try that now! Quote Link to comment Share on other sites More sharing options...
lysaer Posted November 24, 2017 Author Report Share Posted November 24, 2017 For future reference if anyone else has this issue set function to LF wheel speed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.