lekonna Posted September 4, 2017 Report Share Posted September 4, 2017 (edited) Hi, So there is this pretty annoying thing that has started happening since windows 10 with vipec, if the system hibernates the vts exe crashes when the system wakes up. Any advice here? Its pretty annoying to road tune and then loose all of the data in the log because of this.I'm running the latest sw i could find on the vipec page.best regards,Janne K Edited September 4, 2017 by lekonna Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 4, 2017 Report Share Posted September 4, 2017 We have had this reported before and I believe it is fixed in the G4+ software but we wont be updating the old VTS software. You will have to turn hibernate off or maybe standby might work better. Quote Link to comment Share on other sites More sharing options...
lekonna Posted September 4, 2017 Author Report Share Posted September 4, 2017 well that's a bummer. lost few hours worth of logs just because of this :/ Quote Link to comment Share on other sites More sharing options...
lekonna Posted September 4, 2017 Author Report Share Posted September 4, 2017 If i upgrade to g4+ thunder, is there a way i could re-use my old v88 map without too much manual work ? Quote Link to comment Share on other sites More sharing options...
Simon Posted September 4, 2017 Report Share Posted September 4, 2017 Yep the maps can be transferred over they will need to be checked well though particularly if you have pressure sensors calibrated in psi.It is a case of being connected to the G4+ at the point you open the old V series map and it will convert as it loads. Quote Link to comment Share on other sites More sharing options...
lekonna Posted September 5, 2017 Author Report Share Posted September 5, 2017 Ok, thanks for this. My maps should be in kpa anyways. br, Janne Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.