AlexLSX7 Posted April 22, 2018 Report Share Posted April 22, 2018 I am planning on fitting my ID1050x injectors tomorrow and am updating my injector settings on the Link G4+ Xtreme. I have the spreadsheet from ID for the Link with the correct settings, but when i add the ones provided, the software changes them to very slightly different values. e.g. - 0.125 = -0.0131 When i add that in, the software will change it to 0.0128 As these values seem to be pretty tight between each value, i imagine using what the Link decides is not the correct way to go about it. Any ideas why they are changing and how I can get the correct ones added? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 23, 2018 Report Share Posted April 23, 2018 I think it is just a resolution issue, I would probably not be too worried about the 2/1000 of a millisecond difference. The smallest increment that this table will accept is 0.0016ms Quote Link to comment Share on other sites More sharing options...
AlexLSX7 Posted April 23, 2018 Author Report Share Posted April 23, 2018 Ok thanks Adam. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.