Grant Baker Posted June 6, 2018 Report Share Posted June 6, 2018 Hi Guys, Don't suppose anybody has Trigger offset information for the BMW M54 engine? We have Trigger 1 & 2 on falling edge. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 6, 2018 Report Share Posted June 6, 2018 Offset is typically 35-45 but trig 2 should be set to rising (our decoder actually uses both the falling and rising edges but it must be set to falling to work correctly). Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted June 7, 2018 Author Report Share Posted June 7, 2018 Thank you Adam Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted June 14, 2018 Author Report Share Posted June 14, 2018 Interestingly... This one has a trigger offset of 0deg... Quote Link to comment Share on other sites More sharing options...
Radek Posted March 26, 2020 Report Share Posted March 26, 2020 Adam, where did you get this information from? I'm looking for the same values for M62 engine. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 27, 2020 Report Share Posted March 27, 2020 I have little info on the M62, but set up trigger as multitooth/missing, trig 1 is reluctor, 60-2. Trig 2 optical/hall, pull-up on, sync mode "cam level". I dont have the trigger offset but many BMW's are around 280 or -80deg. For the VVT the Holden V6 mode should work. Quote Link to comment Share on other sites More sharing options...
Poseidon Posted October 13, 2020 Report Share Posted October 13, 2020 -324 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.