sama Posted June 22, 2018 Report Share Posted June 22, 2018 Hello everybody, just bought a WR104 for a 2004 STI 2.5 which had cobb accesport with SD flash, so i am re-using the MAP sensor (which is already working perfectly) and the AEM 30-2010 IAT wired to the MAF connector, I need some help filling up CAL TABLE (not sure if I use CAL1 or 2) and the correct information as I can't find it anywhere, help will be greatly appreciated. Sama Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 22, 2018 Report Share Posted June 22, 2018 It looks like it is the same sensor we sell so you can use one of the built-in calibrations. Set up like below. sama 1 Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted June 22, 2018 Report Share Posted June 22, 2018 If you couldn't find the sensor data you weren't looking very hard. https://aemelectronics.com/files/instructions/30-2010 Sensor Data.pdf sama 1 Quote Link to comment Share on other sites More sharing options...
sama Posted June 22, 2018 Author Report Share Posted June 22, 2018 I did Brad but there is no easy table I would have needed to make one from scratch :-D Thanks Adam as always spot on! 12 hours ago, Adamw said: It looks like it is the same sensor we sell so you can use one of the built-in calibrations. Set up like below. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.