supra Posted July 3, 2018 Report Share Posted July 3, 2018 Hello . using MGT trigger kit sensors on rb26 i see trigger synchronize but not RPM reading .. after 2-3 attempts wen the engine starts everything looks perfect without any trigger error.. Thank you Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 3, 2018 Report Share Posted July 3, 2018 Please do a trigger scope during cranking or idle and attach it here. Also a copy of your map so we can check your settings. https://1drv.ms/v/s!AiYbYlZQuRHPmieMTkwQDCXEb2LY Quote Link to comment Share on other sites More sharing options...
Simon Posted July 3, 2018 Report Share Posted July 3, 2018 HI Thanks for the email. Looking at the trigger scope you have the crank position signal inverted you will need to swap the signal and ground wires at the sensor. I would also suggest lowering the filter level on to level 1 on the trigger 1 setting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.