chris.p Posted August 4, 2018 Report Share Posted August 4, 2018 I’ve got full functioning dash2pro via can and have coms to the Link Tuning software but I can’t get them both at the same time its either one or the other ive tried setting the dash to can 2 but made no difference am I overlooking something obvious? Fury g4+ Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 4, 2018 Report Share Posted August 4, 2018 This sounds like you are probably using the old CANDASH cable which also has serial wires inside, this will interrupt PC comms when connected. The CANDASH cable was originally designed for our old DisplayLink dash which used both serial & CAN depending on what ecu it was connected to so is not ideal for a for a CAN only dash. The quickstart guide we package with the dash suggests the connection is made with a CANF connector which wouldnt give you this problem. The solution is to cut the CANDASH cable down so the serial wires are less than about 200mm length, or change to a CANF plug and add your own CAN wires. Quote Link to comment Share on other sites More sharing options...
chris.p Posted August 6, 2018 Author Report Share Posted August 6, 2018 Thanks ill give that a try regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.