Jump to content

Link A Loom


AlexSavv
 Share

Recommended Posts

Hey guys,

wondering if anyone knows how the Link Loom A is put together? 

Specifially, the monsoon has 1 5v output, does the A Loom splice this multiple times to allow for it to be used across multiple sensors, or is the Loom simply 1 wire per pin?

 

Thanks

Al

Link to comment
Share on other sites

Assuming you are talking about the 2.5 or 5.0M A loom, then the 5V supply is spliced into two for MAP & TPS.  The sensor ground is spliced into 4 for MAP, TPS, IAT & ECT.  The trigger wires also have sensor grounds and the shield already spliced to the shield/gnd pin.  Typically I would splice the 5V again myself to allow a couple of extras for pressure sensors etc.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...