Brody Walker Posted September 5, 2018 Report Share Posted September 5, 2018 Hi there, I've been running a link knock light for about 3 years now & it use to work great. It would turn green the moment the engine started. For the last few months it no longer turns green when I initially start the engine, it takes a engine load/revs to register the engine has started. It's gradually been getting worse & now doesn't register unless it's at full load or at 6000+ rpm. I bought another sensor but it still does the same thing. Is there anyway to reset the unit? Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Simon Posted September 5, 2018 Report Share Posted September 5, 2018 It effectively resets at each engine start. I would check the wiring to and from the sensor and the ground for the unit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.