skeruno Posted September 14, 2018 Report Share Posted September 14, 2018 Hi there! I always have gotten really great support here so i hoped some of you could help me out with the current issue at hand. Im working on a Nissan 350z with an G4+. The car is driving so i decided to check out all the settings and values once more. I found out that the vvt is not receiving any signal from trigger 2. The vq has a combined trigger signal with the POS and CPS. I have tries some, imho, logical changes but i seem to get a signal error from the solenoids. Some of you here know whats going on? What am i doing wrong? Hope you can help me out. Kind regards, Vincent 350 coupe new 08-09-2018001.pclr Log 2018-09-8 11;47;38 am.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 14, 2018 Report Share Posted September 14, 2018 Start by running the cam angle test on both the cams, to get the correct offset numbers for the DI and trig 2 VVT. Use a test pulse count of 6 for this test. Report back if that doesnt solve it. Use the smallest "cam angle #X" number from the runtimes screen below as your offset: Quote Link to comment Share on other sites More sharing options...
skeruno Posted September 15, 2018 Author Report Share Posted September 15, 2018 Thanks a lot Adam! I will get in this today and report back. Regards, Vincent Quote Link to comment Share on other sites More sharing options...
skeruno Posted September 15, 2018 Author Report Share Posted September 15, 2018 Hi there, just reporting back: it fixed it! Thanks a lot for the super support! Kind regards, Vincent Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.