Jump to content

Aem uego wideband


darts99
 Share

Recommended Posts

hi again, im having issues with my 1 day old wideband.  wideband is getting switched 12v and is being grounded on the ecu ground. white wire is sending signal to my stock o2 signal wire. The signal in pc link is not moving(10.0 afr) where as the wideband gauge its self is leaning out. ive been having a hard time getting the car to run and i believe this is why.v4 type r map.pclr

Link to comment
Share on other sites

1st , I wouldn't ground the wideband on the ECU. ground it to the battery. 2nd, have you tried F12 to see if the analog voltage are changing on your Analog input 6 ? instead of just looking at lambda ? You might have a wiring issue or the aem needs to be configured.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...