ayjayef Posted September 28, 2018 Report Share Posted September 28, 2018 Hey all, I'm going around in circles and I'm sure someone here can help me make some sense. Trying to test a Nissan R35 smart coil on a G4+ Fury. I can hook a dumb coil up and get a tiny spark using the PCLink ignition test (no igniter) so I know the Fury trigger and the wiring from the ECU is okay but I can't for the life of me get a test spark on the smart coil. Picture below of the coil, ground and power are being run direct from the battery (using awg18 wire), white runs to Link-A10 (Ign4) and there is a alligator clip connected to the ground electrode and engine ground (not obvious in my crappy picture) The pulse on the white wire, is 10Hz as the test should be. Any ideas why it's not working? Andy. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 28, 2018 Report Share Posted September 28, 2018 Your pinout is wrong. Have a look at the last page of this doc: https://www.efisolutions.com.au/assets/files/Instruction_Manuals/200026-N14.pdf Quote Link to comment Share on other sites More sharing options...
ayjayef Posted September 28, 2018 Author Report Share Posted September 28, 2018 (red faced) - Yeah, that would do it! Coils didn't come with any info, google wan't much help but I found a picture of connectors. Dumb mistake. (still red faced) Thanks Adam. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.