JaiKai Posted October 28, 2018 Report Share Posted October 28, 2018 I have a Nissan 300ZX TT that has a G4+ ECU and two Link Lambda modules. Trying to set these up myself but i cannot get the ecu to detect the modules attached to the can bus. All i get is these errors shown from the realtime values screen. The cable has two connections and has a 120R resistor at the end. I've tried just plugging in one of the modules but still cant get it to detect. Quote Link to comment Share on other sites More sharing options...
JaiKai Posted October 28, 2018 Author Report Share Posted October 28, 2018 looks like i've managed to solve this myself thankfully. After i sense checked all my connections and double checked the canbus cable short loom that connects to the ecu i discovered that the wiring is all wrong compared to pictures i've seen online. So i picked the cables off and put them in the proper locations and hey presto its working. Just shows you you shouldn't trust ebay and double check the wiring connections when buying cables that are not oem. MagicMike 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 29, 2018 Report Share Posted October 29, 2018 Yeah that is definitely not one of our cables by the looks. Quote Link to comment Share on other sites More sharing options...
JaiKai Posted October 29, 2018 Author Report Share Posted October 29, 2018 i've messaged the company i bought it from and advised them to change the listing. They state on the listing that its for the Link G4+ but don't mention you need to modify the cable for it to work properly. Quote Link to comment Share on other sites More sharing options...
JaiKai Posted October 29, 2018 Author Report Share Posted October 29, 2018 i've messaged the company i bought it from and advised them to change the listing. They state on the listing that its for the Link G4+ but don't mention you need to modify the cable for it to work properly. Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted October 29, 2018 Report Share Posted October 29, 2018 It looks like they've reversed the wires. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.