Fotis Posted December 24, 2018 Report Share Posted December 24, 2018 Okay so here's another problem i've come to. Rev limit is set to 7200 rpm with limit control range 200rpm. When hit the rev limit it activates and then it is still ACTIVE ON until the rpm drops to 4611rpm. What could it be? Also the launch control does not build enough boost (max 0,5 bar) retard is degrees absolute -35. Launching the car from 4000 rpm and it stalls.(AWD mitsubishi lancer 4g93 turbo 1.5 bar) Quote Link to comment Share on other sites More sharing options...
Fotis Posted December 24, 2018 Author Report Share Posted December 24, 2018 Anyone? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 25, 2018 Report Share Posted December 25, 2018 Your exit decay rate is set to 1%/20ms, that means a 100% cut will take 2000ms before full power is restored. A more common decay would be something like 50%. Quote Link to comment Share on other sites More sharing options...
Fotis Posted December 25, 2018 Author Report Share Posted December 25, 2018 Ohh okay i see thanks Adamn again .Merry christmas Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.