razzmtazz Posted January 16, 2019 Report Share Posted January 16, 2019 hi guys i have a link g3 upgraded to g4 cant seem to find pinouts on it in the manual as need to config some outputs and inputs Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 17, 2019 Report Share Posted January 17, 2019 Does page 25/26 of the manual not give you the info you need? Quote Link to comment Share on other sites More sharing options...
razzmtazz Posted January 17, 2019 Author Report Share Posted January 17, 2019 I can't seem to make out what is what on the ecu pins for example injector 5 out is what pin on the ecu can you please clarify Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 18, 2019 Report Share Posted January 18, 2019 Ok, attached is the best I can do. Im pretty sure the ones I have placed a question mark next to arent actually connected on the evo 1-3 ecu, it seems some of the Evo4-8 pin functions may have been listed in this table by mistake. For instance the Evo1-3 didnt have a heated oxygen sensor, baro sensor or IC spray lamp but they are still listed. G3 Evo1-3 pinout.pdf Quote Link to comment Share on other sites More sharing options...
razzmtazz Posted January 18, 2019 Author Report Share Posted January 18, 2019 thanks but what does n/c mean not connected?what if i want to use these pins? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 18, 2019 Report Share Posted January 18, 2019 Yes, it means not connected. You will not be able to use any NC input or output. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.