400s Posted February 9, 2019 Report Posted February 9, 2019 Anyone with the Dwell times for Denso 099700-2550 COP (wasted spark) which is running on an evo 5? Thanks Steve. Quote
Adamw Posted February 11, 2019 Report Posted February 11, 2019 It looks like a toyota coil similar to the common 1ZZ/1NZ coils. Import the table below is what I have used with success. They are saturated by about 2.4ms @14V but they dont like to run that high for very long - especially if run wasted spark they will overheat quickly. So this dwell table runs them 2.1ms most of the time then just bumps it up near the peak torque area where it may be needed. 90919-02240 dwell.lte Quote
400s Posted February 11, 2019 Author Report Posted February 11, 2019 Thank you Adamw. will try it out later today and let you know how it goes. Steve. Quote
MarcD Posted February 24, 2019 Report Posted February 24, 2019 hi Adam would it be suitable to use the same dwell table for toyota 1NZ coils running on MX5 1.6 supercharged, wasted spark setup? Thanks Marc Quote
Adamw Posted February 24, 2019 Report Posted February 24, 2019 7 hours ago, MarcD said: hi Adam would it be suitable to use the same dwell table for toyota 1NZ coils running on MX5 1.6 supercharged, wasted spark setup? Thanks Marc Yep. Quote
Demetris Posted April 25, 2019 Report Posted April 25, 2019 On 2/11/2019 at 9:19 AM, Adamw said: It looks like a toyota coil similar to the common 1ZZ/1NZ coils. Import the table below is what I have used with success. They are saturated by about 2.4ms @14V but they dont like to run that high for very long - especially if run wasted spark they will overheat quickly. So this dwell table runs them 2.1ms most of the time then just bumps it up near the peak torque area where it may be needed. 90919-02240 dwell.lte Can you please upload again the table ? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.