bilal buran Posted March 8, 2019 Report Share Posted March 8, 2019 G4 link New E-throttle module wiring help help help Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted March 8, 2019 Report Share Posted March 8, 2019 If you open the link software and go to the help section it maybe in there. Quote Link to comment Share on other sites More sharing options...
Snow leon Posted March 8, 2019 Report Share Posted March 8, 2019 Hello i need the wiring diagram for bmw e throttle gas pedal comes 6 pins ,i did not find it in the help section , can you help me . thank you https://www.bimmerworld.com/BMW-Interior/BMW-Pedals/Accelerator-Throttle-Pedal-Assembly-35426786282-E46-M3-330i-330Ci-325i-325C-More.html Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 8, 2019 Report Share Posted March 8, 2019 7 hours ago, bilal buran said: G4 link New E-throttle module wiring help help help Attached below. 2 hours ago, Snow leon said: Hello i need the wiring diagram for bmw e throttle gas pedal comes 6 pins ,i did not find it in the help section , can you help me . thank you https://www.bimmerworld.com/BMW-Interior/BMW-Pedals/Accelerator-Throttle-Pedal-Assembly-35426786282-E46-M3-330i-330Ci-325i-325C-More.html 1&2 are sensor ground. 3&5 are supply voltage (I assume 5V) 4&6 are AP sub and main. E-throttle Module Instructions.pdf bilal buran and Snow leon 2 Quote Link to comment Share on other sites More sharing options...
bsh Posted April 25, 2020 Report Share Posted April 25, 2020 Hi, is it possible to use the e-throttle module with only 1 pedal position? Using a volvo pedal with only 1 analog output to pedal main and none for the pedal sub? (pedal assembly also have a pwm output which I believe cant be used?) Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 26, 2020 Report Share Posted April 26, 2020 13 hours ago, bsh said: Hi, is it possible to use the e-throttle module with only 1 pedal position? Using a volvo pedal with only 1 analog output to pedal main and none for the pedal sub? (pedal assembly also have a pwm output which I believe cant be used?) Thanks the E-throttle module is basically just a dumb high current H-bridge, it does not do any of the control, it just does increases the current handling of the normal aux outputs. So the pedal sensors and TP sensors still connect directly to the ecu and all the normal rules apply. The work-around for the odd pedal sensor would be to wire the single signal output into two analog inputs. Quote Link to comment Share on other sites More sharing options...
bsh Posted April 26, 2020 Report Share Posted April 26, 2020 Thanks:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.