Slowgti Posted March 14, 2019 Report Share Posted March 14, 2019 Hello all, I have a thunder ecu I am going to run in a Vw mk4 with a turbo 07k 5 cylinder. I have a conventional 6 speed manual trans already, I am curious about setting it up with a dsg transmission. I have found out syvecs can be setup to send the correct canbus info to the dsg mechatronic system. Has anyone here played with this on a link ecu? Thanks, Joel Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 15, 2019 Report Share Posted March 15, 2019 Hi Joel, No we dont sorry. I believe even with the Syvecs it will not work "standalone", the DSG control needs CAN from the matching ABS and BCM units as well as the engine ECU. Quote Link to comment Share on other sites More sharing options...
iecku.tavea racing Posted March 15, 2019 Report Share Posted March 15, 2019 I have worked with Syvecs and DSG. It works really fine! Also Ecumaster advertised that they now support the CAN Stream the DSG TCU needs to operate. Quote Link to comment Share on other sites More sharing options...
Slowgti Posted March 15, 2019 Author Report Share Posted March 15, 2019 Ok, I have access to a couple factory dsg cars. I don't know much about disassembly and coding, is this something I can hook up a can sniffer and sort out? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 16, 2019 Report Share Posted March 16, 2019 There is no DSG functionality/strategies in our ECU's at this time so having the CAN messages isnt going to help you much. Quote Link to comment Share on other sites More sharing options...
Slowgti Posted March 16, 2019 Author Report Share Posted March 16, 2019 Understood, thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.