piotr Posted March 31, 2020 Report Share Posted March 31, 2020 Hi, I wanted to ask if it is possible to run e throttle on v4r 2.0t P&P ecu? There is not to many i/o on this ecu but the question is if it can be done ? thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted April 1, 2020 Report Share Posted April 1, 2020 Can be done with some modifications to the board. Quote Link to comment Share on other sites More sharing options...
ozyvr4 Posted April 4, 2020 Report Share Posted April 4, 2020 What would need to be alter on the board..I also am interested . Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 4, 2020 Report Share Posted April 4, 2020 Wire pigtails would be added to the board to bring out Aux 9 & 10 as well as they would probably give you a couple of extra analog inputs since the VR4 board is pretty limited and you will need them for 2 x TPS and 2 x pedal sensors. There are also a couple of changes needed to the main power supply circuit to give the e-throttle H-bridge controller 12V. You will need to ship it back to Link NZ and it is about NZD$150 job last I heard (just to give you an idea - need to confirm yourself). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.