Crispin Posted August 29, 2017 Report Share Posted August 29, 2017 I've used up my AN temp inputs on my Thunder ECU but still have a few AN volt inputs free.Anyone setup standard ECT sensors through an AN volt input with a resistor between 5v and input pin?Would be nice if someone had something already mapped out with voltage vs temp using a certain resistor DenisAlmos 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 29, 2017 Report Share Posted August 29, 2017 (edited) Yes, you should be able to find most info in the help file. You dont need voltage vs temp, our cal tables will let you enter ohms and do the math for you. Edited August 29, 2017 by Adamw Changed one pic. b3tuning 1 Quote Link to comment Share on other sites More sharing options...
Crispin Posted August 29, 2017 Author Report Share Posted August 29, 2017 Great, so with a 1k resistor I can use the same values as when wiring throug the AN temp inputs? Quote Link to comment Share on other sites More sharing options...
Simon Posted August 29, 2017 Report Share Posted August 29, 2017 HI Chrispin yes with a 1K pullup to 5V you can use our cal numbers in ohms. b3tuning 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.