Jump to content

neil brown

Members
 View Profile  See their activity

  • Posts

    373

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Posts posted by neil brown

  1. low impedance injectors

    in Link G1

    Posted

    right thats the manifold and wiring sorted

     

    added in 25 watt 4R7 ohm resistor into the system, the orginal injectors were 11 ohms and new injectors are 3.1 ohm with a 4R7ohm  25 watt resistor

     

    with this set up will the injector outputs on the ecu be able to run this quite happily

  2. in gear boost limiting

    in Link G1

    Posted

    can the g1 ecu support boost limiting in gear

     

    will be running a ppg 5 speed gearbox with 1.8 bar of boost, but it has a standard uk 5th gear cog and dont think it will link it will like 1.8 bar of boost

     

    can this ecu has spare input wire to activate a low boost setting ?

  6. low impedance injectors

    in Link G1

    Posted

    what i mean the standard injectors are high impedance and i want to run these low impedance injectors as they are the correct size for what i need

     

    can i add in a resistor to increase the value to the same as high inpedance injectors and will the ecu drivers be ok with it

  7. low impedance injectors

    in Link G1

    Posted

    can the link ecu which runs high impedance injectors as standard

     

    can i add in a resistor in line to bring up the value to run these low impedance injectors as requiring 650cc instead of 440cc as going to running a garrett gt2860rs turbo shortly

  8. v5-6 throttle body and idle valve

    in Link G1

    Posted

    i have a possum link ecu running  on a ver 4 engine

     

    can the the ecu run the later throttle body and idle speed control valve as new engine i am looking at has a ver 5 sti heads and a ver 4 inlet doesnt fit them

     

    if not looks like i can cut the ver 4 inlet and weld up the 12mm extension gap to suit the ver 5 heads

  9. link display

    in Link G1

    Posted

    yeah..........

     

    once you have a good look at it, can you email me on the address above in this thread whats the damage is and cost of repair pleae and your opinion if it is worth repairing

     

    cheers neil

  15. link display

    in Link G1

    Posted

    tried the reboot make no difference at all

    opened up unit found white plug melted which the 2cables go onto and a centre pin with brown cable for power feed melted and pin going into black pcb to be very poor and loose

     

    there is enoogh lenghth on cables to be reterminated but the black pcb looks it had a fry. is the black pcb available

×
×
  • Create New...