Amer A Hbahbeh Posted June 20, 2019 Report Share Posted June 20, 2019 Hello Guys Im wiring my 1jz vvti on G4 storm Ecu im using 1 injector drive for each 3 injectors,for example, inj drive1=inj1,2,3 and inj drive 2 = inj 4,5,6 so what mode do i chose for this setup on the pclink Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted June 21, 2019 Report Share Posted June 21, 2019 Multi point group injection mode. Ragnar 1 Quote Link to comment Share on other sites More sharing options...
Ragnar Posted June 21, 2019 Report Share Posted June 21, 2019 Perfect, But I heard that we can wire 2 inj per 1 drive, is it better than the one above or not? thanks a lot for quick reply Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 21, 2019 Report Share Posted June 21, 2019 You could do semi-sequential by wiring the injectors in the correct pairs to 3 drives. Semi-sequential may give a slightly smoother idle compared to multipoint group. Ragnar 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.