George GEP Posted August 17, 2019 Report Share Posted August 17, 2019 has anybody done variable launch control on Xtreme or Storm? i was thinking to do using Digital input where 0 would be preset 3000rpm and 1 would be 5000rpm but what if i want to let customer choose 1000-7000 range whatever he wants 1000steps is that doable? hm or i can use external voltage regulator 0-5v adjustable one, wire it do analog input. and make launch rpm limit map Analog input scaled by voltages 0-5 3000-8000rpm i guess this should work? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 18, 2019 Report Share Posted August 18, 2019 Set launch RPM to 3D mode, you can then put whatever you like on the launch table axis. The most common option is a multi-position "trim switch" connected to an analog input, you then reference the analog input on the launch table. You really want a switch with "detents" so that you can achieve the same setting easily, something like this: Quote Link to comment Share on other sites More sharing options...
George GEP Posted August 19, 2019 Author Report Share Posted August 19, 2019 yeah, i thought about same logic thanks Quote Link to comment Share on other sites More sharing options...
tbase Posted October 31, 2020 Report Share Posted October 31, 2020 @Adamw Sorry for digging this topic. What is it supposed to be set of Y Axis in this case? Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 31, 2020 Report Share Posted October 31, 2020 It is up to you depending on what you are trying to acheive. In many forms of racing it is common to have non-driven wheel speed on one axis so that the acceleration can be maximised. Another common option is a timer that starts when the clutch is released so you increase RPM based on time. Quote Link to comment Share on other sites More sharing options...
tbase Posted November 1, 2020 Report Share Posted November 1, 2020 @adamw My set up is link with AIM PDM and AIM GPS08. Is it possible to use GPS Speed as Non Driven Speed? Can Fury steam this data from AIM? Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 1, 2020 Report Share Posted November 1, 2020 Yes, you can send GPS speed to the ecu. GPS is often not very good for standing starts due to the lag but I have never tried with the AIM one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.