sokudo performance Posted October 2, 2019 Report Share Posted October 2, 2019 Hi all, I have installed a storm ecu on a 1jzgte non-vvti engine. I have a wiring specialties pro harness with a interface harness. I am currently working on a start up/base map and i am running into a non-start issue. I have tested the injectors and coils and all work correctly in test mode, but i am not getting spark while cranking. I have looked up the trigger parameters in the help section and have put in the desired trigger settings for trigger 1 & 2, (trigger 2 VVT set to OFF). I also noticed i am not registering a engine speed either, so i assume my trigger is off. I have a aftermarket intake manifold, so cam sensor is going to the sensor closest to the cam gears. I was hoping one of you experts could take a look at my calibration file and give me your thoughts. Thank you in advance for the help. 1JZ Stand alone - base map v3.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 2, 2019 Report Share Posted October 2, 2019 Although your screenshot was taken when offline, the bottom right shows engine kill and ecu hold power are on. Do these turn off when ignition is on? Quote Link to comment Share on other sites More sharing options...
sokudo performance Posted October 2, 2019 Author Report Share Posted October 2, 2019 Hi Adam, yes sir. These turn off when the ECU is online. I went in an disabled ECU hold power. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 2, 2019 Report Share Posted October 2, 2019 Do a trigger scope and attach it here. https://1drv.ms/v/s!AiYbYlZQuRHPmieMTkwQDCXEb2LY Quote Link to comment Share on other sites More sharing options...
sokudo performance Posted October 2, 2019 Author Report Share Posted October 2, 2019 Hi Adam, i ran a trigger scope and will attach this afternoon. I changed the offset and it fired right up. I still need to check timing with it locked. I will check and send a copy of the trigger scope. Thank you! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.