almerekhi Posted October 26, 2019 Report Share Posted October 26, 2019 hello guys im having issue to start my car : supra mkiv 2jz-gte stock internals Turbo garrett gtx3584rs Future Fab Toyota 2JZGTE V-band Exhaust Manifold Linkecu g4+ (SUPRALINK - #TS2JZ+) Radium Fuel Delivery System ID1050x Dual pump welbro F90000267 LQ9 Coils conversion kit also i have link can to lambda on can 2 but i don't understand how to map it with ecu link map 3 bar the car wont start at all can someone help me with base map for my setup best regards. Quote Link to comment Share on other sites More sharing options...
Fotis Posted October 26, 2019 Report Share Posted October 26, 2019 Hi , is the ecu unlocked? Quote Link to comment Share on other sites More sharing options...
almerekhi Posted October 26, 2019 Author Report Share Posted October 26, 2019 16 minutes ago, Fotis said: Hi , is the ecu unlocked? yes Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 26, 2019 Report Share Posted October 26, 2019 First step is to do a log of it cranking. Attach the log and a copy of your map here. https://www.youtube.com/watch?v=_P1LRANeO4A Quote Link to comment Share on other sites More sharing options...
bsh Posted October 31, 2019 Report Share Posted October 31, 2019 Do you have a stable rpm while cranking about 200 rpm? Are trig1 and trig2 green? (runtimes-triggers to check status) Have you confirmed that the coils are working/wired correctly? You can do an ignition test via the software to activate each ign output. Very nice function. You can do the same with the injectors also, but be careful not to flood the engine with fuel... Btw I love the 2JZ:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.