can bus setting for bmw

[Poseidon]

Hello everybody

Have a BMW e46 330ci with M3 instrument cluster.
ECU is an Xtreme.
I've set the can mode mini r50-r53.
some works well.
Unfortunately, the oil temperature in the M3 tacho not.
but that would be very important for a turbo engine.

synonymous, the dsc mk60 does not work what I would be important.

In addition, it shows the steering position of the runtime misc.
Unfortunately, the engine almost dies from me when I steer the stand.
Is it possible to integrate the steering during idling without input directly?

can someone please help me

 
my English is not good.
Take the translator

thank you 

 

 

[Adamw]

I will send you a private message with a file you can try.

[Poseidon]

Thank you very much
The oil temperature, speed and water temperature work.
engine control light does not work as well as water temperature light

oil level?

switching lightning does not work yet.
Picture attached

[Adamw]

In the file I gave you the water temp light should be controlled by Virtual aux 5 and the CE light is virtual aux 8.  If you temporarily set these two outputs to "test (on)" does anything change?

The oil lamp is controlled by Virtual aux 6, on my map this was linked to the oil pressure switch on DI1.  The OEM bmw oil level sensor will not work.

[Poseidon]

works very well
Only the oil level is not correct, the only looks through timer.
I still need steering.
When steering in idle the speed goes down sharply.
Where I leave it idle I know.
but he does not recognize the signal from the steering

[Adamw]

I have no info on any signal from the steering so I cant help you with that.  As I said in my earlier message to you, you can generally compensate for power steering load by running relatively retarded ignition timing at normal idle, then use aggressive idle ignition control to look after the power steering loads.

[Poseidon]

Everything works except for the DSC. (MK60)
DSC would be very important that it works.
Can anyone help me with that

 

Still have the problem that he almost dying while steering in the stand.
Idle ignition I have stepped in 3 degrees

[Poseidon]

Nobody can help me

[Omar H A]

On 11/19/2019 at 10:46 AM, Adamw said:

I will send you a private message with a file you can try.

Hi Adam

I have the same setup and still have problem with CAN inputs like AC request ,.....

Any help please 

[Joao - Wisepowertec]

Same thing here, but starting from scratch, can I also have that Adamw Sent?
 

Many thanks!

[FIS]

On 11/19/2019 at 3:46 PM, Adamw said:

I will send you a private message with a file you can try.

Hello Adam,

Could you please send me the file, I am using Xtreme ECU on 2jz E46 body

 

[Adamw]

 

[FIS]

Thank you!

[Cedric]

Hi guys I got an e46 with a link ecu and I'm trying to make the dashbord working any help? Happy to try the e46 m3 set up. Thanks

[Adamw]

The file is attached to the other thread I linked to a couple of posts up.