Adturb Posted April 9, 2020 Report Share Posted April 9, 2020 Is there an issue with the latest firmware as my gear detection (displayed on a Plex uSDM 100) has now got a huge delay and seems erratic after the update. Previously this was working brilliantly (for the last 2+ years and every firmware in-between). I haven't tried to reload the firmware or relearn gear detection as it does seem to display the right gear, eventually. As a complete side note, are there any benefits of upgrading from my G4+ to G4x platform? Specifically more digital I/O would be a great benefit for my application. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted April 9, 2020 Report Share Posted April 9, 2020 I honestly noticed this recently with my gear display on my dash, I chocked it up to me playing with rear gear ratio at first but after a re-calibration of the wheel speeds its still kind of spotty and inconsistent. Maybe @Simon or @Adamw might have some insight on this. As for + to X platform upgrade, the physical pinouts of the units are not changing. Its just a new processor in the box with new software, firmware, and functionality. The physical I/O is not changing. Adturb 1 Quote Link to comment Share on other sites More sharing options...
Adturb Posted April 9, 2020 Author Report Share Posted April 9, 2020 Cheers. I may look to downgrade the firmware unless it's likely an new revision will be released- although it may be a fair assumption that the G4+ will be left and the Link focus will shift to the G4X platform? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 10, 2020 Report Share Posted April 10, 2020 As far as I know nothing has changed related to the gear detection code for many years. Lets start by attaching a log of a short drive and your tune. Quote Link to comment Share on other sites More sharing options...
Adturb Posted April 13, 2020 Author Report Share Posted April 13, 2020 On 4/10/2020 at 8:53 AM, Adamw said: As far as I know nothing has changed related to the gear detection code for many years. Lets start by attaching a log of a short drive and your tune. It's weird as the gear indication/ detection has been fantastic up to now. I'll download a log when I get 2 mins and post it up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.