Electredge Posted May 26, 2020 Report Share Posted May 26, 2020 Is it supported? will it be? Thanks Jon Quote Link to comment Share on other sites More sharing options...
Vaughan Posted May 26, 2020 Report Share Posted May 26, 2020 Looks like the NC uses the Mazda 3 trigger pattern which is supported by G4+ and G4X Electredge 1 Quote Link to comment Share on other sites More sharing options...
Electredge Posted May 26, 2020 Author Report Share Posted May 26, 2020 Thank you Vaughan, much appreciated Vaughan 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 27, 2020 Report Share Posted May 27, 2020 I have found some of these engines have the cam signal inverted from what our original "Mazda 3" trigger mode was designed for. If yours is you will find the engine runs fine at idle etc but as soon as you try to advance the VVT cam it gives trigger errors and misfires. So if you have these symptoms, then change trigger mode to the Suzuki Swift V2 mode which is designed around the same pattern but with the cam inverted. Quote Link to comment Share on other sites More sharing options...
Electredge Posted May 27, 2020 Author Report Share Posted May 27, 2020 good to know, thanks Adam... I think I experienced this once already with a Motec M400 box... had to switch up the cam wiring but never really understood why it was different Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.