Knox Posted June 12, 2020 Report Share Posted June 12, 2020 Hello, I attaced tune file and log file. Engine is 1JZGTE with link g4+ black storm ecu. Trig 1 signal and Trig 2 signals are turns to YES while cranking but trig1 error counter rising (upto 117) and engine did not fire. I'm stuck, I think its crank sensor issue but Trigger 1 signal shows YES while cranking. And other interesting thing is rpms shows high on cranking usually around 1800 but sometime it shows around 4000rpm. 1JZ G4+ Storm Black Sample.pclr 1JZ Trig1 Err Counter.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 12, 2020 Report Share Posted June 12, 2020 Can you do a triggerscope while cranking. Here's how: https://1drv.ms/v/s!AiYbYlZQuRHPmidU5V2CmTcv6t2y?e=S8f0E0 Quote Link to comment Share on other sites More sharing options...
JMP Posted June 13, 2020 Report Share Posted June 13, 2020 what sort of 1JZ is it... vvti, non vvti? You've got a vvti trigger pattern selected for trig one but vvt set to off.. vvti engines use a 36-2 wheel, the non-vvti engine uses a 12 tooth wheel . All the setup guidance is in the help file but you'll also want to do a trigger scope to confirm the reluctors aren't wired backwards Quote Link to comment Share on other sites More sharing options...
Knox Posted June 15, 2020 Author Report Share Posted June 15, 2020 On 6/12/2020 at 1:36 AM, Adamw said: Can you do a triggerscope while cranking. Here's how: https://1drv.ms/v/s!AiYbYlZQuRHPmidU5V2CmTcv6t2y?e=S8f0E0 Thank you for support. Here is the trigger scope and also the tune file. I changed trigger 1 arming treshold (do it same with link help file)and also activate intake vtc solenoid thats why I added the tune file again. 1JZ G4+ Storm Black Sample.pclr Trigger Scope Log 2020-06-15 4;38;36 pm.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 15, 2020 Report Share Posted June 15, 2020 It appears the engine was not turning when you done that triggerscope. Please do it again, make sure you only hit capture when the engine is cranking. Quote Link to comment Share on other sites More sharing options...
Knox Posted June 16, 2020 Author Report Share Posted June 16, 2020 11 hours ago, Adamw said: It appears the engine was not turning when you done that triggerscope. Please do it again, make sure you only hit capture when the engine is cranking. I'm sorry. I attached two triggerscope now. Trigger Scope Log 2020-06-16 10;55;14 am.llg Trigger Scope Log 2020-06-16 10;55;30 am.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 16, 2020 Report Share Posted June 16, 2020 Your crank wheel is mechanically damaged. It appears that somebody has knocked a tooth off somewhere near the normal 2 missing teeth. Quote Link to comment Share on other sites More sharing options...
Knox Posted June 18, 2020 Author Report Share Posted June 18, 2020 On 6/16/2020 at 12:36 PM, Adamw said: Your crank wheel is mechanically damaged. It appears that somebody has knocked a tooth off somewhere near the normal 2 missing teeth. Thank you, issue solved looks like trigger wheel rusted and broken by itselft. I really love Link ecu and software but the support is on an other level (great). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.