neil brown Posted June 15, 2020 Report Share Posted June 15, 2020 How do I power up a Link g4 plugin on the bench to test it Quote Link to comment Share on other sites More sharing options...
neil brown Posted June 15, 2020 Author Report Share Posted June 15, 2020 Is it possible with out plugging into car Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 15, 2020 Report Share Posted June 15, 2020 Usually the easiest option is via the TVS diode if its in an accessable area. As per my pic below, find the big barrel shaped component on the bottom PCB, with a couple of small aligator clip leads or similar, connect +12V to the striped end and ground to the other end. Quote Link to comment Share on other sites More sharing options...
neil brown Posted June 16, 2020 Author Report Share Posted June 16, 2020 Thanks Quote Link to comment Share on other sites More sharing options...
barge Posted November 30, 2020 Report Share Posted November 30, 2020 Is there a same/similar connection method to power up a g4x PNP on the bench? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 1, 2020 Report Share Posted December 1, 2020 Yes, same method works on all our ECU's. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.