Jacky Fung Posted July 12, 2020 Report Share Posted July 12, 2020 Dear All, Hope you and your family safe in Corona Virus. I have a question that I will connect a Monsoon G4X into a Honda Civic, I have a question that how can I setup G4X to use internal MAP Sensor instead of An Volt 1? I cannot found the setting of it. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted July 12, 2020 Report Share Posted July 12, 2020 When using a Monsoon you should have an 'Internal' option in that Source selection list. If you are making your monsoon basemap out of one of the sample honda maps and you haven't connected to the ECU then the basemap will still think it's a plugin and so won't show the 'Internal' option. To make the basemap offline you will need to start with the sample Monsoon map and go from there. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 12, 2020 Report Share Posted July 12, 2020 If you dont yet have a Monsoon then you could attach your tune file here and one of us can load it into a monsoon to convert it for you Quote Link to comment Share on other sites More sharing options...
Jacky Fung Posted July 13, 2020 Author Report Share Posted July 13, 2020 Hi there. I have a monsoon here. Since I tried to convert the tune file offline at home. That's mean when I load the file into monsoon, it will auto convert the file? Right? Thx for your kindly help! Jacky Quote Link to comment Share on other sites More sharing options...
Vaughan Posted July 13, 2020 Report Share Posted July 13, 2020 when loading the file into the monsoon and saving it back again it will convert it to a monsoon basemap and you can then go set the MAP sensor to internal Quote Link to comment Share on other sites More sharing options...
Jacky Fung Posted July 13, 2020 Author Report Share Posted July 13, 2020 Oh that's good. Thx for your valve and useful information! Really appreciate. Jacky Vaughan 1 Quote Link to comment Share on other sites More sharing options...
Jacky Fung Posted July 14, 2020 Author Report Share Posted July 14, 2020 Status update: it works! when I load the map to monsoon, the Map sensor can choose Internal. Yeah~~~!!! I have another silly question. I was use the setting in Analog Temp 2, but it keeping the reading -40C and I checked the input voltage was 4.98. For the ECT, there are two pin, as I understand, a 5V input to the sensor, it will drop the voltage when it become hot. But I found when I switch on the ign, both are 5V.... anything I did wrong? The car can start but I think it might due to the wrong ECT and it cannot hold for idle. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
rrob Posted July 14, 2020 Report Share Posted July 14, 2020 Temp sensors need 0v/sensor ground not 5v. Quote Link to comment Share on other sites More sharing options...
Jacky Fung Posted July 14, 2020 Author Report Share Posted July 14, 2020 OH!!! that's should be the problem!! Let me check. Thx for your help! Quote Link to comment Share on other sites More sharing options...
Jacky Fung Posted July 15, 2020 Author Report Share Posted July 15, 2020 rrob, you are my hero~~~!!!! it works well!! Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.