Reemen Posted July 26, 2020 Report Share Posted July 26, 2020 So i have installed a BTI gauge and hooked it up via CAN port. There is 2 more wires for traction control and boost control that i am going to connect to an analog input each. I was just wondering how i set it up to control the boost and traction. What should i select the AN volt as? Any help would be appriciatedhttp://www.btigauges.com/link--vipec.html Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 26, 2020 Report Share Posted July 26, 2020 What two wires are you talking about? Are they from the gauge? Quote Link to comment Share on other sites More sharing options...
Reemen Posted July 26, 2020 Author Report Share Posted July 26, 2020 15 minutes ago, Adamw said: What two wires are you talking about? Are they from the gauge? yes sorry, they come with the gauge, and are for controlling boost and traction. In the manual the Gauge comes with it says to connect the two wires to each individual analog input. But thats where the help stops. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 26, 2020 Report Share Posted July 26, 2020 Can you attach the manual or a photo of the note in the manual so I can see how it is worded. Quote Link to comment Share on other sites More sharing options...
Reemen Posted July 26, 2020 Author Report Share Posted July 26, 2020 4 minutes ago, Adamw said: Can you attach the manual or a photo of the note in the manual so I can see how it is worded. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 26, 2020 Report Share Posted July 26, 2020 Ok, you originally said "BTI gauge" which was why I was confused, you actually have a BTI Dash. So these analog outputs are for if you want buttons on the dash screen to adjust boost aim or traction control slip - kind of like having a knob on the dash. I guess they may allow you to configure them as other functions such as launch control etc too. Connect them to any analog input, set it up as a GP input or 0-5V input then use that input as one of the axes on your boost or traction tables. Quote Link to comment Share on other sites More sharing options...
Reemen Posted July 26, 2020 Author Report Share Posted July 26, 2020 2 minutes ago, Adamw said: Ok, you originally said "BTI gauge" which was why I was confused, you actually have a BTI Dash. So these analog outputs are for if you want buttons on the dash screen to adjust boost aim or traction control slip - kind of like having a knob on the dash. I guess they may allow you to configure them as other functions such as launch control etc too. Connect them to any analog input, set it up as a GP input or 0-5V input then use that input as one of the axes on your boost or traction tables. oh sorry, haha. Okay perfect, that doesnt sound so hard (Y) Thank you so much Quote Link to comment Share on other sites More sharing options...
kyddo112 Posted December 10, 2022 Report Share Posted December 10, 2022 On 7/26/2020 at 6:12 PM, Reemen said: oh sorry, haha. Okay perfect, that doesnt sound so hard (Y) Thank you so much Were you ever able to get this working? I have mine connected to ANVolt 7 using calibration table 10 but not sure what to do with the percentages in the table. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.