[email protected] Posted August 29, 2020 Report Share Posted August 29, 2020 Hi there, I am currently using G4+ Fury the engine set up is K24A2 bottom end + K20A head. Since I really like the idea of onboard logging and therefore purchased G4X Fury via the agent last week I am expecting it soon. Prepare myself by start building up the base map on G4X. Unsure at the trigger setting as follows; in G4+ Trigger1 is Crank sensor and K24 type. Trigger 2, I use LH exhaust cam and LH ntake came is used for VVT in G4+ the LH exhaust is not available for selection as trigger 2. Therefore seeking for you advice on what is the correct trigger set up for K20A engine. Thanks and cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 30, 2020 Report Share Posted August 30, 2020 In G4+ the "trigger 2 VVT" setting only applied if the cam that was connected to trigger 2 had VVT, the K20 doesnt have VVT on the exhaust so that setting wasnt relevant. In G4X all VVT settings are moved to the VVT folder - and obviously there are only intake VVT settings for this engine. Your G4X trigger settings will look something like below: Quote Link to comment Share on other sites More sharing options...
[email protected] Posted August 30, 2020 Author Report Share Posted August 30, 2020 Hi, Thanks for advice. Cheers, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.