Volcom86 Posted September 17, 2020 Report Share Posted September 17, 2020 Hey Guys, Looking at getting my self a Plex SDM 500 - Display & Logger.. Couple of newbie questions will it work with the G4+ - anyone else running one? Also what connector do I need to connect the Plex can-bus to the Links can-bus so I can plug it in Links ecu (photo attached for reference) Thank you in advance Quote Link to comment Share on other sites More sharing options...
neil brown Posted September 17, 2020 Report Share Posted September 17, 2020 Ecu in picture if that's yours is a G4 not a G4+ Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 17, 2020 Report Share Posted September 17, 2020 Yes they will work out of the box using the generic dash stream - or the Plex CAN is fully customisable if you want to send something that isnt in the standard stream. To connect to the plug-in CAN port you will want a CANPCB cable and a CANF plug. Volcom86 1 Quote Link to comment Share on other sites More sharing options...
Volcom86 Posted September 17, 2020 Author Report Share Posted September 17, 2020 2 hours ago, Adamw said: Yes they will work out of the box using the generic dash stream - or the Plex CAN is fully customisable if you want to send something that isnt in the standard stream. To connect to the plug-in CAN port you will want a CANPCB cable and a CANF plug. Thank you @Adamw really appreciate your help Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.